Newsroom.
Industrial AI Applications – How Time Series and Sensor Data Improve Processes
Over the past decade the industrial sector has seen major advancements in automation and robotics applications.
Still Using Hand Calculations for Thermal Analysis?
When you’re doing a thermal analysis for your building, you have two choices: Calculate by hand and hope it’s right or calculate with a 3D simulation and know it’s right.
What’s new in Femap v.12
Femap software version 12 is the latest release of the standalone finite element modeling pre- and post- processor for engineering simulation and analysis.
What’s New in SATK 7.0
The sine processor has undergone a major overhaul and its interface is more intuitive.
Validating a Simplified FEM using Simcenter FE Model Update
It is often required to create lightweight, simplified versions of large FEMs in order to reduce solution time or post-processing effort.
Correlating Simulation & Modal Test Results with Simcenter 3D
A powerful way of reducing design conservatism is to validate the finite element model used to simulate its performance.
How to map flow forces to a structural analysis in Simcenter
Simcenter offers a dedicated application to map steady state or transient flow results onto a target model, typically an independent structural model from the same geometry but with a different mesh.
How to simulate delamination using cohesive elements in Simcenter Multiphysics
Cohesive elements are special-purpose 3D elements used to model adhesive joint failure as well as delamination of composite plies.
How to create 3D solid mesh for a sandwich composite laminated car hood using Simcenter Laminate Composites
You may use the solid mesh to get better results in the ply out-of-plane direction to evaluate delamination.
How to perform random analysis of mixed laminated composite – metallic structures
This tips and tricks shows how to use Simcenter Laminate Dynamics to quickly evaluate the behavior of a satellite antenna assembly.
Approaches to Laminate Buckling with Simcenter
Buckling of plates inherently involves large transverse deflections and out-of-plane bending, for which transverse shear becomes significant.
How to preview NX NASTRAN contact and glue regions
When you define a contact or glue condition in your model, NX Nastran internally creates contact or glue elements using the contact or glue regions you select as well as the search distance that you define.
No results found.